==========================================================

    Xavier product BSP Release Note - EA713

==========================================================

Usage:
1. Decompress by root
   $ sudo tar zxf EA713AA00-1PC-R1.1.4.4.5.1.tar.gz

2. Enter L4T directory
   $ cd JetPack_4.5.1_Linux_JETSON_AGX_XAVIER/Linux_for_Tegra

3. Enter the recovery mode 
   power off -> press recovery button -> power on -> wait 2 seconds -> release recovery button

5. Start to flash BSP 
   $ ./install.sh

6. Flash more modules (speed up)
   $ ./install.sh -r

---------------------------------------
EA713AA00-1PC-R1.1.4.4.5.1 20210319 (md5:1be8791c3a4abdfe0a4fdd48b5137f91)
---------------------------------------
- Upgrade to L4T 32.5.1 (JetPack 4.5.1)

---------------------------------------
EA713AA00-1PC-R1.1.3.4.4.1 20210111 (md5:02b8383fbbdcb2fb403863601a4c4d12)
---------------------------------------
- Upgrade to L4T 32.4.4 (JetPack 4.4.1)
- Disable RNDIS temporarily for stability 

---------------------------------------
EA713AA00-1PC-R1.1.2.4.4 20200925 (md5:806cd2308954869e340eee83b524fa39)
---------------------------------------
- Support RNDIS

---------------------------------------
EA713AA00-1PC-R1.1.1.4.4  20200722
---------------------------------------
- Upgrade to JetPack 4.4 (L4T 32.4.3)
- Fixed an issue that sometimes system rebooted due to a PCIe error
- Fixed a compatible issue for some monitors

---------------------------------------
EA713AA00-1PC-R1.1.0.4.4  20200610
---------------------------------------
- Upgrade to JetPack 4.4 DP (L4T 32.4.2)

---------------------------------------
EA713AA00-1PC-R1.0.9.4.3  20200528
---------------------------------------
- set nvpmodel mode to last time setup (store user settings)

---------------------------------------
EA713AA00-1PC-R1.0.8.4.3_cn312s+c353+c351  20200428
---------------------------------------
- Enable Autologin base on 1.0.7.4.3 

---------------------------------------
EA713AA00-1PC-R1.0.7.4.3_cn312s+c353+c351  20200325
---------------------------------------
- Add Frame grabber drivers: C353, C351,CN312SW

---------------------------------------
EA713AA00-1PC-R1.0.6.4.3  20200221
---------------------------------------
- Fixed an issue that system would reboot after shutdown

---------------------------------------
EA713AA00-1PC-R1.0.5.4.3  20200121
---------------------------------------
- Fixed an issue that shutdown command sometimes failed (but failed...)

---------------------------------------
EA713AA00-1PC-R1.0.4.4.3  20200121
---------------------------------------
- Upgrade to JetPack 4.3 (L4T 32.3.1)

---------------------------
EA713AA00-1PC-R1.0.4.4.2.2
---------------------------
- Remove Ethernet chip workaround
- Support C353 in JetPack 4.2.2 based BSP
- Fixed JMicron's USB to SATA issue (#30321)